Software & Digitizers

Place the item on the graphics tablet, start the Logic Embroidery Trace Software, trace the design, save the design as a graphics file, load the graphics file into Accurate.

 Quick, Accurate, Easy.

Logic Embroidery Trace software is recommended for tracing designs and loading into Accurate

An electrical device connected to a computer that sends very accurate X,Y coordinates to the computer using a pen stylus or mouse-like cursor. Place an object or pattern on the digitizing tablet, start the digitizing software, place the pen stylus or cursor where digitizing should begin, push the buttons on the pen or cursor to start digitizing and digitize the object, pattern, design.

Digitizing tablet sizes range from 44x60in (110x150cm), 36x48in (90x120cm), 24x36in (60x90cm), 20x24in (50x60cm), 12x18in (30x45cm), and 12x12in (30x30cm). Standard accuracy is .01" (10/1000) but higher accuracies are available.

Digitizing software is required to use the digitizing tablet.

More Information on Digitizing Tablets

Use a graphics tablet to trace an embroidery design and save as a graphics file

Place the design on the the graphics tablet, start the Logic Embroidery Trace software, use the pen stylus to quickly trace the design and save the design as a graphics file.

Quick, Accurate, Easy

Load the graphics file of the design into your embroidery digitizing software and create an embroidery file for your embroidery machine.

Embroidery Digitizing Software

There are dozens are software programs that will take the graphics file created by the graphics tablet and Logic Trace Embroidery Software and turn the design into a stitch file.

More Information on the software