|
Save time and money
using a graphics tablet to trace designs and outlines for use in
Bernina Artista.
Place the item on
the graphics tablet, start the Logic Embroidery Trace Software,
trace the design, save
the design as a graphics file,
 load the
graphics file into Bernina Artista.
Quick,
Accurate, Easy. |
Logic Embroidery Trace software is required for tracing designs and loading into
Bernina Artista
|
An electrical device connected to a computer that sends very
accurate X,Y coordinates to the computer using a pen stylus or
mouse-like cursor. Place an object or pattern on the digitizing
tablet, start the digitizing software, place the pen stylus or
cursor where digitizing should begin, push the buttons on the pen or
cursor to start digitizing and digitize the object, pattern, design.
Digitizing tablet sizes range from 44x60in (110x150cm), 36x48in
(90x120cm), 24x36in (60x90cm), 20x24in (50x60cm), 12x18in (30x45cm),
and 12x12in (30x30cm). Standard accuracy is .01" (10/1000) but
higher accuracies are available.
Digitizing software is required to use the digitizing tablet.
More Information on Digitizing Tablets
|
Use a graphics tablet to trace an embroidery design and save as a graphics file
Place the design on the the graphics
tablet, start the Logic Embroidery Trace software, use the pen
stylus to quickly trace the design and save the design as a graphics
file.
Quick, Accurate, Easy
Load the graphics file of the design
into your embroidery digitizing software and create an embroidery
file for your embroidery machine.
Embroidery Digitizing
Software
There are dozens are
software programs that will take the graphics file created by the
graphics tablet and Logic Trace Embroidery Software and turn the
design into a stitch file.
More Information on the software |
