|
Save time and money
using a digitizer to trace objects and outlines for use in UG Cad.
Place the item on
the digitizing tablet, start the Logic Trace Digitizing Software,
trace the outlines,
 save
the outline as a DXF graphics file, load the DXF file into UG Cad.
Quick,
Accurate, Easy. |
Logic
Trace Cnc Dxf digitizing software is recommended for tracing designs
and parts and loading into UG Cad
|
An electrical device connected to a computer that sends very
accurate X,Y coordinates to the computer using a pen stylus or
mouse-like cursor. Place an object or pattern on the digitizing
tablet, start the digitizing software, place the pen stylus or
cursor where digitizing should begin, push the buttons on the pen or
cursor to start digitizing and digitize the object, pattern, design.
Digitizing tablet sizes range from 44x60in (110x150cm), 36x48in
(90x120cm), 24x36in (60x90cm), 20x24in (50x60cm), 12x18in (30x45cm),
and 12x12in (30x30cm). Standard accuracy is .01" (10/1000) but
higher accuracies are available.
Digitizing software is recommended to use the digitizing tablet.
More Information on Digitizing Tablets
|
 Digitizing
software that allows the user to quickly, easily, and accurately
trace parts, designs and templates and save the graphics as a DXF
file for loading into UG Cad and other CNC software.Place the
object on the
digitizing tablet, start the Logic Trace Cnc Dxf software, trace/
digitize the design, save the DXF graphics file. Digitizing can be
point to point, continuous curves, freehand drawing, lines, arcs,
circles, and curve fitting between points.
Standard graphics formats include
DXF, DWG and GCODE file formats. Additional formats available.
More Information on the
software |
