|
Creating DXF Files
1. The item must be digitized first before
creating the dxf file.
2. After digitizing, click the Create File
button to create the dxf file.
3. The prompt for the filename appears:
4. Input the filename, you do not need to input the .dxf
extension, it will be automatically added.
5. The default folder is data folder in the main program folder
(usually c:\Program Files\The
Logic Group\Logic Trace CNC DXF\data). Click the Change button
to change the folder for the DXF file.
6. After inputting the filename and optionally changing the
folder, click OK to create the file. A message window will
appear when the file has been successfully saved.
7. The Logic Trace software creates a condensed DXF file with
only the entities digitized. A few of our clients have troubles
reading these small dxf files. If you have troubles reading the
DXF files try loading the DXF file into a CAD reading program
and then saving the DXF file and then loading the saved file
from the CAD program. Many CAD readers are available on the
internet for free or under $100. The one we recommend is Cad
Standard Lite at www.cadstd.com.
8. If you have digitized multiple items, each will be saved as a
seperate layer in the dxf file. |
