WinEx Pro Digitizing Software

WinEx Pro™ is a Windows based 3-D graphical cut & fill takeoff program designed to easily, quickly, and accurately determine earthwork quantities. WinEx Pro™ is an powerful earthwork program designed for both Site work contractors of all sizes and General contractors seeking better control of site work. WinEx Pro™ is exceptionally easy to learn - users normally are bidding within an hour of setting up - which makes it an excellent fit for customers who want to be productive quickly.

WinEx Pro™ is loaded with value added features such as users trace in contours, enter sloping spot elevations, and define unchangeable regions. In addition, WinEx Pro™ has a powerful Work Region features which allows you to enter an unlimited number of areas, each containing unique characteristics such as topsoil stripping, sub grade allowances, shrink and swell.

WinEx Pro™ uses an exceptionally dense grid to compute its values. Included in WinEx Pro™ is a powerful measurement tool that allows you
to calculate volumes, tonnage's, areas, footage's and any other miscellaneous quantity on site (trenching, paving, landscaping, curbs etc.).

WinEx Pro™ generates color coded cut & fill maps that show you where the deep areas of cuts & fills occur, cross-sections between any two points
on the site, and detailed 3-dimensional displays of any surface (and also a cut/fill display in 3-D). WinEx Pro™ features a slick site balancing
routine that lets you quickly adjust either the entire site or any portion of the site to minimize import/export.

WinEx Pro™ runs on most digitizers and can directly paste answers into any Windows estimating program or spreadsheet.

WinEx Pro™ is an outstanding program that will be a powerful tool for your estimating department. Give us a call today to get a free evaluation or
call us at (800) 826-7763 to setup a demonstration over the internet using NetMeeting.

Significant Features of WinEx Pro™:

Vertical Walls
Pads
Site Balancing.
Trenching.
Job Phasing.
Slope Routines
Grid Staking Output Map
Subgrade material Library
3-D Graphics.
Subsoil Strata.
Connected Spot Elevations
DXF File Importing.
Maps and Cross Sections.
Low Cost - allows takeoff product to be expensed to first project.
Speed - estimating man hours decrease by 40% - 80%.
Productivity - increases award to bid ratio.
Accuracy - reduce "waste factor" to bids.

WinEx Pro™ System Requirements

Processor	-	Intel Pentium or Equivalent
Operating System	-	Windows 9x, Millennium, NT, 2000, XP
Hard Drive Space	-	Minimum 20 MB
CD-ROM Drive	-	Required for system installation
I/O Ports	-	One functional Serial Port
		One functional USB Port or Parallel Port
Digitizer		Any digitizer with functional 32-bit WinTab Driver
RAM	-	Appropriate recommended RAM for operating system used
Graphic Card	-	SVGA (or better)
Monitor	-	SVGA Color (or better)

Recommended

WinEx Pro™ performance will be increased by
Faster CPU
More RAM
4 MB or More Video Memory
17" Screen or Larger with Lowest Dot Pitch Practical

Buy a new Large

Digitizing Tablet to use with the software

Details

Buy a new Small

Digitizing Tablet to use with the software

Details

Buy a used Large

Digitizing Tablet to use with the software

Details

Buy a used Small

Digitizing Tablet to use with the software

Details