.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Quickly and accurately trace parts and patterns and save vector files for CNC and CAD machines
DXF, PDF, SVG
Almost all CNC and CAD programs can read one of these file formats.
Works with Plasmacam, Vectric and Vcarve Pro, Autocad, Mastercam, Rhino, Solidworks, Sheetcam, Enroute, Flashcut, Sharper CNC, and many more.
Designed for Plasma Cutters, Waterjets, CNC Routers, Laser Cutters, Vinyl Cutters, Plotters, Printers, Fabric Cutters, and and all CNC Machines.
Connect multiple boards for tracing very large patterns. Connect two to eight boards together for tracing patterns anywhere from 5x8' to 8x24'
- The standard accuracy of the electronic board is 0.01 in (0.254mm) which is more than adequate for most applications.
- A higher accuracy board with 0.005 in (0.127mm) is also available.
- Metal, wood, plastic, cardboard, plywood, paper, fabric, glass, almost anything
- Some metals interfere with the magnetic field of the pen stylus. Usually the outside of the part can be traced, it is the inside holes that have problems. In that case trace the outside and move the holes onto paper.
Trace an outline using the sharp tip of the pen stylus or using a cursor with magnifying glass and cross-hair.
The two most commonly sold sizes are 44x60" (110x150cm) and 5x8' (1.5x2.4m). We also have available smaller and larger tracing systems.
Trace complicated shapes simply by tracing with the pen stylus or with the 16 button cursor.
Trace smooth curves with a series of points and when done the software will create a smooth curve through the points.
Define straight lines by tracing starting and ending points, define arcs with 3 points
Trace circles using any 3 points on the circle or tracing the center point and diameter. Trace squares and rectangles by tracing any 3 corners.
Trace an entire outline with the pen stylus or cursor in minutes. Trace and save.
Load a picture into the software, trace the outline using the computer mouse, and save a vector file or calculate numbers.
- Place the cell phone or ipad on the tracing board for easy access
- Move the software control window to the cell phone (or ipad) and push buttons to control the tracing
- Move the software display window to the ipad (or tablet) and watch the design while tracing
Program the buttons on the cursor to be different software commands, Trace patterns without using the computer
Change the software to meet your needs.
Also support for cellphones, ipads, tablets, external monitors
Software currently available in 15 languages
The electronic board is a grid of wires going up and down and across with a hard formica surface. The pen stylus or cursor generates a magnetic field that is "sensed" by the board. Push a button on the pen or cursor or push down on the tip of the pen and a stream of accurate XY points are sent to the computer. The Logic Trace software then displays these points as a drawing or numbers.
44x60 in (110x150 cm)
36x48 in (90x120 cm)
24x36 in (60x90 cm)
20x24 in (50x60 cm)
12x18 in (30x45 cm)
36x48 in (90x120 cm)
30x36 in (60x90 cm)
5x8 ft (1.5x2.4m)
5x12 ft (1.5x3.6m)
5x16 ft (1.5x4.8m)
8x11 ft (2.4x3.3m)
8x16 ft (2.4x4.8m)
8x22 ft (2.4x6.6m)
0.01" (0.254mm)
0.005" (0.127mm)
.
The boards are made in the USA, are in stock, and ready to ship anywhere in the world.
Connect multiple boards for tracing very large patterns. Connect two to eight boards together for tracing patterns anywhere from 5x8' to 8x24'
After assembling a Jumbo Tracer, the boards are calibrated by tracing several points across the boards.
Trace between boards, by defining alignment points, moving the pattern, realigning, and editing
